Ingenico 6500 ユーザーズマニュアル

 

 

Ingenico 6500 User’s Guide 

45 

 

6.4.9 

Poll Timeout is the amount of time the host waits for a response after transmitting a device poll 
before it records a device poll timeout, in units of one-tenths of a second. 

This time varies. It depends on the number of devices connected to the host system. The more 
devices connected to the host, the longer it takes the host to poll each device. If the PIN pad 
device misses more than 16 consecutive polls, the host will abandon the device. 

Display 

Action 

 

To access the extended menu, restart the terminal 

by pressing [1] + [CAN] + [OK]; while the terminal 

is starting up, access the extended menu by 

pressing the [1] and [3] keys simultaneously. 

Serialnum Inject 
System Config 
System Info 

Supervisor Menu 

Press [ ], [ ], [ ], [Enter] to select Supervisor 

Menu. 

Enter Password: 

Key password [2] [6] [3] [4], then press [Enter]. 

Change Password 
Application File 
Security 

Sys Parameters 

Press [ ], [ ], [ ], [Enter] to select Sys 

Parameters. 

Download Method 
Download Port 

Setup Port 

Press [ ], [ ], [Enter] to select Setup Port. 

Port1 
Port2 

Select Port1 or Port2. 
(By default, Port 1 = Host, Port 2 = Aux.) 

Interface Type 
Baud Rate 
Data Bits 
Stop Bits 
Parity 
LAN Address 
Retry Count 
Response TMO 

Poll TMO 

Press [ ] seven times, and then press [Enter] to 

select Poll TMO (timeout). 

Old Value:  300 
Enter New Value:  

Enter an amount of time after which the port 

should cease polling, in units of 1/100 of a second.