Ingenico 6500 ユーザーズマニュアル
46
Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.10
Setting the Turnaround Timeout
The Turnaround Timeout indicates the time a concentrator or a hub will wait between its
request for data and a device's response in a poll sequence.
request for data and a device's response in a poll sequence.
Display
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
System Config
System Info
Supervisor Menu
Press [ ], [ ], [ ], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Application File
Security
Sys Parameters
Press [ ], [ ], [ ], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Download Port
Setup Port
Press [ ], [ ], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port2
Select Port1 or Port2.
(By default, Port 1 = Host, Port 2 = Aux.)
(By default, Port 1 = Host, Port 2 = Aux.)
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Retry Count
Response TMO
Poll TMO
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Retry Count
Response TMO
Poll TMO
Turnaround TMO
Press [ ] eight times, then press [Enter] to select
Turnaround TMO.
Turnaround TMO
Old Value: 300
Enter New Value:
Enter New Value:
Enter an amount of time after which the port
should cease turnaround, in units of 1/100 of a
second.