Honeywell VCR DCP200 ユーザーズマニュアル

DCP200 Profile Controller & Recorder - Product Manual

Page 38

Powering Up

51-52-25-150, Issue 1 – April 2009

There are four red LEDs that by default, indicate the status of the primary and secondary 
control outputs, automatic tuning and alarm status. The top line of the graphical display has 
four labels for LED indicators. The function of these LEDs and their display labels can be 
changed using the PC configuration software. The information in this manual assumes 
standard functions for these LEDs.

Each instrument has four keypad switches, which are used to navigate through the user 
menus and adjust the parameter values. In configuration screens, a context sensitive 
scrolling help text is displayed that guides the user about the function of the keys.

Table 3. Keypad button functions

Moves backwards to the previous parameter or screen in the 
current mode.

If editing a parameter, ensure that the current 

(highlighted) parameter value is correct before pressing the key as 
this action will update the instrument to the value displayed.

In menus and configuration choice screens, this key moves to the 
next item on the list.
Editable values can be decreased by pressing this key. Holding the 
key down speeds up the change.
In Trend view this key moves the Cursor Line back through the 
stored data points

In menus and configuration choice screens, this key moves to the 
previous item on the list.
Editable values can be increased by pressing this key. Holding the 
key down speeds up the change.
In Trend view this key moves the Cursor Line forward through the 
stored data points

Moves forwards to the next parameter or screen in the current 
mode.

If editing a parameter, ensure that the current 

(highlighted) parameter value is correct before pressing the key as 
this action will update the instrument to the value displayed.

Pressing the 



key while holding down the 



key causes the 

instrument to move up one menu level. From Operation Mode and 
in most menus, this will result in entry to the Main Menu.
From sub-menus, it is necessary to carry out this sequence more 
than once to reach the main menu.

If editing a parameter, ensure that the current 

(highlighted) parameter value is correct before pressing the key as 
this action will update the instrument to the value displayed.