Hach 900 MAX ユーザーズマニュアル
Page 28
Setting Up the Bottles
Setting Up the Bottles
8990hrd.fm
Section 2
For four-bottle sampling, install the distributor and place all four bottles in the
tray as shown in
tray as shown in
.
Figure 10
Two-bottle Locations
Figure 11
Four-bottle Locations
2.5.3 Eight-, 12-, or 24-bottle Sampling
For eight-, 12- or 24-bottle sets, install the distributor (refer to
). Place the bottles in the tray and install the proper bottle retainer
(
Bottle #1 is the first bottle clockwise (looking down on the tray) from the right
side of the tray. Bottle #1 is located on the inside of each bottle tray for all
multiple bottle sets (
side of the tray. Bottle #1 is located on the inside of each bottle tray for all
multiple bottle sets (
).
1.
Single Bottle Location
2.
Two Bottle Location
3.
Slots for Wire From Bottle Tray (8 or 24 bottle)
1.
1, 2, or 4 Bottle Locations
2.
Slot for Wire From Bottle Tray (8 or 24 bottles)
1
2
1
2
3
Front
Front
2
3
1
4
1
2