Fujitsu KVM series3-Client ユーザーズマニュアル
Appliance Management Panel
Managing SNMP traps
87
590-590-609A
5.7.2
Managing SNMP traps
An SNMP trap is a notification sent by the appliance to a management computer,
indicating that an event has occurred in the appliance that can require further attention.
You can specify which individual SNMP traps are sent to the management computers
by selecting the corresponding check boxes, or you can enable or disable all traps. All of
the FSC KVM appliances have enterprise traps. To interpret these traps correctly,
download the corresponding trap MIB from the Fujitsu Siemens Web site.
indicating that an event has occurred in the appliance that can require further attention.
You can specify which individual SNMP traps are sent to the management computers
by selecting the corresponding check boxes, or you can enable or disable all traps. All of
the FSC KVM appliances have enterprise traps. To interpret these traps correctly,
download the corresponding trap MIB from the Fujitsu Siemens Web site.
5.7.2.1
Enabling or disabling SNMP traps
Click the Settings tab in the AMP.
Select the SNMP - Traps subcategory. A list of traps is displayed. Traps that are
currently enabled are selected; disabled traps are not selected.
currently enabled are selected; disabled traps are not selected.
Figure 30: AMP SNMP - Traps subcategory
Complete one of the following steps:
•
Select or clear the individual trap check boxes.