Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

ページ / 6
 
 
Inform ‚ WLAN ‚ AP-600RP-USB Configuration schemes ‚ Issue October 16
th
 2003 
 
 
Page 6 of 6 
 
 
7. 
Two AP-600RP-USB in repetition mode (WDS) 
 
 
( 2 ) AP-600RP-USB Floor 1 
  ( 3 ) AP-600RP-USB Floor 2 
  ( 4 )  Notebook 
 
WAN:  
PPP over Ethernet 
LAN:  
static IP: 192.168.1.254 
 
subnet Mask: 255.255.255.0 
DHCP 
on: 192.168.1.10 - 90 
 GW: 
192.168.1.254 
 DNS: 
auto 
SSID: CONNECT2AIR 
Channel:  11 (same as AP 2) 
WDS: 
MAC addr. of AP-600RP-USB 2 
 
listed in the table
 
 
 
WAN:  
no ISP 
LAN:  
static IP: 192.168.1.253 
 
subnet Mask: 255.255.255.0 
 GW: 
192.168.1.254 
DHCP disabled 
SSID: CONNECT2AIR 
Channel:  11 (same as AP 1) 
WDS: 
MAC addr. of AP-600RP-USB 1 
 
listed in the table 
 
 
 
TCP/IP:  
get IP and DNS 
 address 
 
 automatically 
SSID: CONNECT2AIR 
Data Rate:  auto
 
 
The ADSL Modem (1) does not have to be configured. 
 
Connecting the devices to the AP-600RP-USB: 
 
 
AP-600RP-USB Floor 1 
 
AP-600RP-USB Floor 2 
 
 
Connect the ADSL Modem to the WAN port of the AP1, otherwise the PPPoE session cannot be established and 
therefore the Internet service cannot be opened. Additional networking devices like network printers, servers or scanners 
can be plugged to one of the free LAN ports of the AP1 or AP2 and will be integrated in the IP segment of 192.168.1.X. 
 
 
Installation Note 
 
In order to have more range up to 6 AccessPoints can be linked together. This case describes the configuration of linking 
two APs together whereas AP1 is the managing one, which initiates the PPPoE session and acts as DHCP server. The 
SSID and the radio channel must be equal for all APs linked, otherwise no connection can be established. Furthermore 
every AP has to know its counterpart, therefore a MAC address table is provided to enter the appropriate AccessPoint. 
 
 
Fujitsu Siemens Computers 
VP MS WLAN
 
 
Delivery subject to availability, specifications subject to change 
without notice, correction of errors and omissions excepted.  
All hardware and software names used are brand names and/or 
trademarks of their respective holders.  
Copyright 
 Fujitsu Siemens Computers, 10/2003 
 
 
X
2
1
4
3