Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

Inform WLAN AP-600RP-USB Configuration schemes Issue October 16

2003

Page 5 of 6

AP-600RP-USB with CABLE Modem

( 1 ) Cable Modem

( 2 ) AP-600RP-USB

( 3 ) Notebook

The Cable Modem does not have
to be configured.

WAN:

dynamic IP address

LAN:

static IP: 192.168.1.254

DHCP

on: 192.168.1.10 - 90

GW:

192.168.1.254

DNS:

auto

Routing: on (cable from Modem

connected to the WAN

interface)
SSID: CONNECT2AIR

TCP/IP:

get IP and DNS

address

automatically
SSID: CONNECT2AIR
Data Rate: auto

Connecting the devices to the AP-600RP-USB:

Connect the CABLE Modem to the WAN port. Additional networking devices like network printers, servers or scanners
can be plugged to one of the free LAN ports and will be integrated in the IP segment of 192.168.1.X.

Installation Note

Beside ADSL, most broadband Internet connections are nowadays established over CABLE Modem (TV cabling). This
case describes using an CABLE modem in connection to the WLAN AccessPoint. The configuration is quite easy and
allows you to share one single Internet connection with several other Clients.

CABLE Modem:
- establishing Internet connection

AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active