Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

CONNECT2AIR™ WLAN AP-600RP-USB

 

 

Page 10 / 62

  

 

 
LED indicators 
 

PWR 

Power indication 

Green 

On 

The power is on. 

Green On 

An active device is connected to the WAN 
port. 

WAN 
 

Link status 

Green 

Flashing  The WAN port is sending or receiving data.

WLAN 

Wireless activity 

Green 

Flashing 

Sending or receiving data via a wireless 
link. 

On 

An active station is connected to the corre-
sponding LAN port. 

LAN 1 - 4 

Link status 

Green 

Flashing 

The corresponding LAN port is sending or 
receiving data. 

 
RESET switch 
 
To reset the system settings to factory defaults, please follow the steps: 
 

1. 

Press the reset button and hold it for more than 10 seconds 

2. 

Release the button 

3. 

After every LED has flashed more than one time and only the LEDs related to a 
set connection are lighting, the AccessPoint is active again.  

4. 

It may take up to a minute to reconnect to the clients. 

 

L

   All changes made to the AccessPoint are lost when the device is reset. Please refer 

to Section 8.6.1 “Administrator Toolbox” for details of how to back up your settings. 

  

 

Ports: 
 

POWER 

Power socket: DC 12V, 1.0A (minimum) 

WAN 

The port for connecting your ADSL or cable modem 

LAN 1-4 

4 switch ports for your networked computers and/or other devices 

USB 

Connector for any printer with a USB interface (Laser, Inkjet, Matrix)