Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

CONNECT2AIR™ WLAN AP-600RP-USB

 

 

Page 11 / 62

  

You can place your AccessPoint (AP) on a desk or another flat surface or mount it 
on a wall. For optimum performance, place it in the center of your office (or your 
home) in a location away from any potential source of interference, such as a metal 
wall or microwave oven. This location must be close to a wall socket and a network 
connection. 

  

a)   Wired LAN connection: Connect an Ethernet cable from your computer’s 

Ethernet port to one of the AP’s LAN ports. You can use a standard Ethernet 
cable or an Ethernet cross-cable: the AP can automatically detect either. 

b)  Wireless LAN connection: Move the AP to a proper position to ensure the best 

transmission performance. 

  

 

 

Figure 4-3 Setup of the AP’s LAN and WAN connections 

 

Prepare an Ethernet cable for connecting the AP to your cable/xDSL modem or 
Ethernet backbone. You can use a standard Ethernet cable or an Ethernet cross-
cable: the AP can automatically detect either. Figure 4-3 illustrates the WAN con-
nection. 

 

Use the printer USB cable to connect your printer to the AP’s USB printer port. 

 

Connect the power adapter to the power socket. Your AccessPoint then will auto-
matically enter the self-test phase. During the self-test, the LAN LEDs will flash. Fi-
nally, the PWR LED will light permanently as the AccessPoint enters normal opera-
tion.