Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル
CONNECT2AIR™ WLAN AP-600RP-USB
Page 19 / 62
6.4 AP-600RP-USB with CABLE Modem
( 1 ) Cable Modem
( 2 ) AP-600RP-USB
( 3 ) Notebook
The Cable Modem does not have
to be configured.
to be configured.
WAN:
dynamic IP address
LAN:
static IP: 192.168.1.254
DHCP
on: 192.168.1.10 - 90
GW:
192.168.1.254
DNS:
auto
Routing: on (cable from Modem
connected to the WAN
interface)
SSID: CONNECT2AIR
SSID: CONNECT2AIR
TCP/IP:
get IP and DNS
addresses
automatically
SSID: CONNECT2AIR
Data Rate: auto
SSID: CONNECT2AIR
Data Rate: auto
Connecting the devices to the AP-600RP-USB:
Connect the CABLE Modem to the WAN port. Additional networking devices like network
printers, servers or scanners can be plugged into one of the free LAN ports and will be
integrated in the IP segment of 192.168.1.X.
Installation Note
Beside ADSL, most broadband Internet connections are nowadays established over CA-
BLE Modem (TV cabling). This case describes using a CABLE modem for connection to
the WLAN AccessPoint. The configuration is quite easy and allows you to share one single
Internet connection with several other Clients.
printers, servers or scanners can be plugged into one of the free LAN ports and will be
integrated in the IP segment of 192.168.1.X.
Installation Note
Beside ADSL, most broadband Internet connections are nowadays established over CA-
BLE Modem (TV cabling). This case describes using a CABLE modem for connection to
the WLAN AccessPoint. The configuration is quite easy and allows you to share one single
Internet connection with several other Clients.
CABLE Modem:
- establishing Internet connection
- establishing Internet connection
AP-600RP-USB:
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
- DHCP Server
- handling the wireless LAN (WLAN) access
- NAT Routing, Firewall are active
5
4
5
1
2
1
3
4
3