Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル
CONNECT2AIR™ WLAN AP-600RP-USB
Page 24 / 62
8.3 Wizard
The Wizard section will guide you through the main settings for your AccessPoint. You will
be prompted to select your ISP (Internet Service Provider) and to check your security set-
tings.
be prompted to select your ISP (Internet Service Provider) and to check your security set-
tings.
8.3.1 How to connect to your Internet Service Provider (ISP)
It is vitally important that you read this chapter carefully in order to choose the right
settings to connect to your ISP (Internet Service Provider). As described in the
hardware installation, you must connect your modem to the WAN port (DSL, cable
settings to connect to your ISP (Internet Service Provider). As described in the
hardware installation, you must connect your modem to the WAN port (DSL, cable
modem) of your AP.
Select your ISP and click on "Next". You will then be prompted to fill in the appropriate in-
formation.
Select your ISP and click on "Next". You will then be prompted to fill in the appropriate in-
formation.
Static IP Address
WAN IP address, subnet mask, standard gateway and your gateway: Enter the settings
provided by your ISP.