Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル
CONNECT2AIR™ WLAN AP-600RP-USB
Page 22 / 62
8
ACCESSPOINT CONFIGURATION
This product is provided with a Web-based configuration interface that can be accessed
via your Web browser, such as Internet Explorer, Netscape Communicator or any other
HTML-compatible browsers. This interface can be launched with any Microsoft Windows,
Macintosh or UNIX-based platforms.
via your Web browser, such as Internet Explorer, Netscape Communicator or any other
HTML-compatible browsers. This interface can be launched with any Microsoft Windows,
Macintosh or UNIX-based platforms.
8.1 Start-up and Log In
To enter the AccessPoint configuration either:
•
Launch the “AccessPoint Start-up Tool” on your desktop or from
“Start/Programs/CONNECT2AIR/WLAN/AP-600RP-USB/ConfigStarter”.
“Start/Programs/CONNECT2AIR/WLAN/AP-600RP-USB/ConfigStarter”.
•
Activate your browser directly and type in the IP address of your AP in the Address field
(for Internet Explorer) or in the Location field (for Netscape) and press ENTER. Default
value is: 192.168.1.254
(for Internet Explorer) or in the Location field (for Netscape) and press ENTER. Default
value is: 192.168.1.254
Once the connection is established, the AP’s password protection window will pop up. To
log in, enter the system password (the factory setting is “connect”) in the System Pass-
word field and press the “Enter” button. You will then be prompted to choose your pre-
ferred language: English, German, French, Italian and Spanish are available.