Control4 V2 プリント

The following sections show you how to do the following tasks 

from your Navigator. Use the System Remote Control to:

• 

Change video playback resolution

• 

Move through the video by percentages

• 

Use the Fast Forward, Rewind, Pause/Play, Stop and Skip 

Fwd/Skip Back functions

Before you start to use the Control4 Media Player (C4-MP2-E), 

ensure that it is installed, and both the Power and Link lights on 

the front of the unit are lit.

Also ensure that you or your Installer has used the Composer 

Media view to scan the network-attached storage for videos to 

use with this player.

See Media Player Installation and Setup Guide and 

Composer User Guide or online Help for more information.

1.  Use the Composer software (Media Edition or Home Edi-

tion, Media View) to identify videos that you want the Media 

Player to be able to play. Videos can be added manually, or 

Composer can scan network-attached storage locations to 

add video files automatically.

2.  In Composer click the 

Media view.

3.  Select the network-attached storage where the videos are 

located, and then click the 

Scan or New button. Scan will 

automatically identify some types of video files (normally 

ISO and IFO/VOBS files in a videoTS folder). Other types 

of video files can be added using the 

New button. This 

action automatically updates the Navigators and provides 

cover art (if available) for easy video recognition.  

4.  For videos that haven’t been identified in the scan process, 

use the 

New function to add the videos manually.

: Use to adjust the video 

playback resolution (1080p, 780p, 

480p, etc.). You can use this to change 

the video resolution if you want to view 

a video in a specific resolution.

: Skips 

through video approximately 5% with 

each press of the button.

: Resumes playback after 

Pause.

: Advance 

or rewind. Press 1 time to advance or 

rewind video 4 times play rate; press 

2 times to advance or rewind video 

16 times play rate; press 3 times to 

advance or rewind video 64 times play 

rate, etc.

: Pauses video. Press 

Play to 

start video where it left off when you 

paused it.

: Stops video. When you press 

Play, video starts at the beginning.

: Use with Go To. 

See “Go To.”

The buttons below show the  

controls for your Media Player.

A key component of the Control4 vision to automate, control, and 

provide entertainment throughout the home is the Control4

®

 

Media Player—a device that plays back video files from your 

home network.

Using the Control4 Media Player with the Control4 system allows 

you to view video files on your TV, and eliminates the need to 

watch them on your computer. The Control4 system already  

allows you to browse cover art and play back your DVD and  

Blu-ray™ discs from any Control4 Navigator. With the addition of 

the Control4 Media Player, now you can also navigate and play 

your video files from the same user interface.

Additional details for advanced functions, such as adding your 

own cover art, are available in the Composer User Guide online 

Help.

Press numbers 

1 through 9 on the keypad to jump to a specific 

point in the video. 

: 

Press 

1 to jump to 10% into the movie. Press 5 to jump to the 

middle of the movie (50%).  If you are at the end of the movie, 

pressing 

2 will take you back to 20% into the movie.