Clicomm CWP-100 ユーザーズマニュアル

 

② 

Select “1: AP Scan” to search the wireless LAN access point around the CWP-100. 

 

If the CWP-100 succeeds in searching the AP, the CWP-100 LCD display “AP Scan Success” 

and restart automatically. 

 

If there is no AP around or if the CWP-100 fails in searching the AP, the CWP-100 LCD display 

“AP Not Found” and return to the previous menu. 

③ 

Select “2: Device Addr” to check the CWP-100 MAC address. 

④  Select “3: WLAN Mode” to choose the CWP-100 wireless LAN mode. 

  Selecting  “Disable”  will  indicate  that  you  will  not  connect  the  CWP-100  to  the  wireless 

LAN AP. 

  Selecting “Station” will indicate that you will connect the CWP-100 to the wireless LAN AP. 

⑤  On “4: ESSID”, you can enter the ESSID for connecting the CWP-100 to the wireless LAN AP. 

⑥  On  “5:  Channel”,  you  can  assign  the  channel  for  connecting  the  CWP-100  to  the  wireless 

LAN AP. (You can choose the channel from 1to 13.) 

⑦  On  “6:  WEP  Setting”,  you  can  enter  the  password  for  connecting  the  CWP-100  to  the 

wireless AP. (You can assign up to 4 number of passwords.) 

 

 Select “1: Key Size” and choose the size of the key among “Disable”, “64bit” and 128bit”. 

 Select “2: WEP Key” and enter the WEP Key Index and WEP Key. 

 

 

 

You need to register with the Internet Service Provider (ISP) to utilize the IP phone functionalities. If you are 

using ADSL Wireless LAN AP (Access Point), set the CWP-100 network as ADSL. If your AP gets the IP 

address from the DHCP server, set the CWP-100 network as DHCP. In other cases, set the CWP-100 

network as static IP.