Clas Ohlson R0084-N ユーザーズマニュアル
5
English
Setting the time, 12- or 24-hour clock and snooze time
1. Plug the mains adaptor both into a power point and the clock’s power socket.
2. Press [ SET ]. The hours display will then begin to flash. Press or hold in [
2. Press [ SET ]. The hours display will then begin to flash. Press or hold in [
▲ ] or [ ▼ ]
to set the hours.
3. Press [ SET ] again and the minutes display will begin to flash. Press or hold in [
▲ ]
or [
▼ ] to set the minutes.
4. Press [ SET ]. The “12H” symbol will then begin to flash. Press [
▲ ] or [ ▼ ] to select
a 12 or 24 hour time display.
5. Press [ SET ] again. The “05” symbol will begin flashing. Press [
▲ ] or [ ▼ ] to set
the snooze time (5-60 minutes).
6. Press [ SET ] again to save settings and to return normal time display. If no button is
pressed for 10 seconds, the clock will automatically return to normal time display.
Note: If the 12-hour clock display is chosen the “PM” symbol will be used for PM time
display. The “AM” symbol is not used or displayed.
display. The “AM” symbol is not used or displayed.
Setting the alarm
1. Press [ AL1•2 ]. Both “A1” (alarm 1) and the hours display will begin to flash.
Press or hold in [
▲ ] or [ ▼ ] to set the hours.
2. Press [ AL1•2 ] again. The minutes display will begin to flash. Press or hold in [
▲ ]
or [
▼ ] to set the minutes.
3. Press [ AL1•2 ] again. “OFF” will appear. Press [
▲ ] or [ ▼ ] to select the type of
alarm or “OFF”.
-
rd: radio
-
bu: buzzer
-
OFF: No alarm
4. Press [ AL1•2 ]. Both “A2” (alarm 2) and the hours display will begin to flash.
Press or hold in [
▲ ] or [ ▼ ] to set the hours.
5. Repeat steps 2 and 3 as listed above.
If you have selected the radio or buzzer alarm for alarm 1 and/or 2, either A1 and/or
A2 will be displayed depending on the corresponding alarm/s you have chosen.
If you have selected the radio or buzzer alarm for alarm 1 and/or 2, either A1 and/or
A2 will be displayed depending on the corresponding alarm/s you have chosen.
Switching the alarm off
1. Press [ AL1•2 ] when alarm 1 or 2 sounds in order to turn off the alarm. The alarm
will go off again at the same time in 24 hours time.
2. If [ NAP
▲ ] or [ RADIO/SL ] is pressed when the alarm goes off, the nap function or
the radio will be switched on and the alarm will be switched off.
Snooze
Press [
] to activate the snooze function when the alarm goes off. The alarm
will sound again after a short delay determined by the set snooze time, refer to
the Setting the time, 12- or 24-hour clock and snooze time section above.
the Setting the time, 12- or 24-hour clock and snooze time section above.