FANUC Robotics America GFK-1541B ユーザーズマニュアル
TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual
–
May 2002
GFK-1541B
2
Installing an IC693CPU364 with Embedded TCP/IP Ethernet
Interface
Interface
The CPU364 with Embedded Ethernet Interface is mounted on the Series 90-30 PLC baseplate. It
is connected to an Ethernet network via a 10Base-T port or a user-provided transceiver cable and
transceiver via an AAUI port.
is connected to an Ethernet network via a 10Base-T port or a user-provided transceiver cable and
transceiver via an AAUI port.
IC693CPU364 Series 90-30 CPU Module with Ethernet Interface
CPU364
EOK
LAN
PS
PORT
PORT
STAT
ETHERNET
RESTART
RESTART
ON
OFF
AAUI
10BASET
STATION
MGR
RS-232
MGR
RS-232
FUSE
DEFAULT
STATION
ADDRESS
LABEL
SERIAL
NUMBER
LABEL
RESTART
PUSHBUTTON
The Series 90-30 CPU364 has several user-accessible elements (only the Ethernet Interface
elements are discussed here.)
elements are discussed here.)
Three Ethernet LEDs are located at the top left of the board. The Ethernet Restart pushbutton is
located below the LEDs. The RS-232 serial port with the RJ-11 connector (similar to a modular
telephone connector) is used to connect to Station Manager and to load software updates. Below
the serial port are two ports, either one of which can be used to connect to the Ethernet network:
the 14-pin AAUI connector (Transceiver port) and the 10Base-T, RJ-45 network port.
located below the LEDs. The RS-232 serial port with the RJ-11 connector (similar to a modular
telephone connector) is used to connect to Station Manager and to load software updates. Below
the serial port are two ports, either one of which can be used to connect to the Ethernet network:
the 14-pin AAUI connector (Transceiver port) and the 10Base-T, RJ-45 network port.
The default station address (MAC address) label, serial number label, and replaceable AAUI port
fuse are concealed by the front cover. The front cover must be removed to access these items.
fuse are concealed by the front cover. The front cover must be removed to access these items.
www.cadfamily.com EMail:cadserv21@hotmail.com
The document is for study only,if tort to your rights,please inform us,we will delete
The document is for study only,if tort to your rights,please inform us,we will delete