Digidesign Control 24 ユーザーズマニュアル

Main Section Overview

The Main section provides the following pri-
mary control sections and capabilities. 

Time Counter Display 

The Time Counter display is an eight-character 
display that shows current session location in 
the current Main Timebase, whether Min:Secs, 
Time Code, Feet.Frames, Bars:Beats, or Samples 
(Time Code and Feet.Frames are only available 
on Pro Tools TDM systems or Pro Tools LE™ sys-
tems with the DV Toolkit™ or DV Toolkit 2™ 
option.)

The current Timebase is indicated by the associ-
ated indicator LED illuminating, at the left of 
the Time Counter display. 

You can change the type of units displayed by 
repeatedly pressing the COUNTER MODE 
switch. When none of the LEDs are lit, it indi-
cates Samples is the current Timebase.

When Control|24 is not communicating with 
Pro Tools, the Counter displays OFFLINE.

Communication and Control Room 
Monitor Sections

This section contains master volume, muting 
and other controls for all monitoring modes. 
Monitoring configurations can be selected and 
sent to multiple sets of speakers and head-
phones. You can also route external sources 
(such as two-track return) or pairs of channels 
from your Digidesign audio interface.

For more information, see Chapter 8, “Control 
Room Monitor Section.”

Transport 

Communication

Numeric Keypad

and 

section

Bank and Nudge

Navigation/Zoom

Groups, Window, 
and Edit sections

Scrub/shuttle

Control Room 
sections

Time Counter