Digidesign Control 24 ユーザーズマニュアル

To undo:

■

Press the UNDO switch. 

To redo:

■

Press SHIFT/ADD+

(CTRL)+UNDO.

The SAVE switch LED will be lit if the session has 
changed from its currently saved state.

To save the changes in a session:

1  

Press SAVE. The SAVE switch LED will flash 

when first pressed, indicating the Save process 
has been armed.

2  

If you want to abort the Save process at this 

point, press ESC/CANCEL.

3  

If you want to complete the Save process, 

press SAVE again. The SAVE switch LED will re-
main lit during completion of the Save process, 
and then afterwards will turn off.

Navigation and Zoom Controls

These controls let you use the UP, DOWN, PRE-
VIOUS, and NEXT for navigation, zooming, or 
selecting material. For more information, see 
“Navigation and Zoom” on page 73. 

The Numeric Keypad

The Numeric Keypad mirrors the function of the 
numeric keypad on the host computer, and is 
used for memory locations, data entry of 
counter values or numerics, for completing edit-
ing operations (using the ENTER key), and for 
Pro Tools Transport and Shuttle modes. 

The CLR key in the Numeric Keypad mirrors the 
function of the Backspace key (Windows) or the 
Delete key (Mac), and clears selected text from 
on-screen text boxes.

Bank Swapping and Nudging

Beneath the Control|24 numeric keypad are the 
Bank Select switches, labeled BANK LEFT, BANK 
RIGHT, and NUDGE. Together, these switches 
allow bank swapping, or channel scrolling in 
single channel increments. 

◆

BANK LEFT and BANK RIGHT swap banks left 

or right, 24 channels at a time. 

◆

NUDGE engages channel-scroll mode, in 

which the BANK SELECT arrows scroll by one 
channel at a time in the appropriate direction.

To bank to the next channels:

■

Press BANK RIGHT.

To bank to the previous 24 channels:

■

Press BANK LEFT.