BMW 2009 328i xDrive Sports Wagon オーナーマニュアル

224

1.

Switch off the lamps and take the remote 
control out of the ignition lock.

2.

Turn the cover to the left, see arrow, and 
remove it.

3.

Turn the bulb approx. 90°, see arrow, and 
take it out.

4.

Disconnect the plug, change the bulb and 
reconnect the plug.

5.

Insert the bulb and turn it until it stops.

6.

Reattach the cover.

H3 bulb, 55 watts

1.

Switch off the lamps and take the remote 
control out of the ignition lock.

2.

Remove the upper cover from the head-
lamp. To do so, pull the rubber seal up and 

off and unscrew the cover using the screw-
driver from the onboard tool kit, see arrow.

3.

Release the wire bracket from the anchor, 
see arrow, and fold it up.

4.

Disconnect the plug, change the bulb and 
reconnect the plug.

5.

Insert the bulb.

6.

Fold the wire bracket down and engage it.

7.

Reattach the cover.

Be careful when installing the cover, oth-
erwise leaks could occur and cause dam-

age to the headlamp system.

<

H7 bulb, 55 watts

Always wear gloves and eye protection; 
the atmosphere within the H7 bulb is 

pressurized. Otherwise there is a risk of injury if 
the bulb is damaged.

<

There are separate headlamp covers for low-
beam headlamps and high-beam headlamps.

Be careful when installing the covers, oth-
erwise leaks could occur and cause dam-

age to the headlamp system.

<

For checking and adjusting headlamp 
aim, please contact your BMW center.

<

ba8_E9091_cic.book  Seite 224  Mittwoch, 29. Oktober 2008  2:59 14

Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG