BMW 2007 X3 3.0si SAV オーナーマニュアル

 47

The set time is transferred to the display of the 
radio or displayed in the instrument cluster.

Ignition key in position 0 or removed:
Press button

1.

The time and display of the miles/kilometers 
appear for a few seconds.

With the ignition key in position 1 or higher, 
you can call up information from the computer 
using the computer button in the turn signal 
lever.
A new function appears each time you briefly 
press the computer button.
The following information is displayed in the 
sequence indicated:

>

Time

>

Outside temperature

>

Average fuel consumption

>

Cruising range

>

Average speed

With the ignition key in position 1 or higher, the 
last active setting is displayed.

If you wish, you can display the following 
functions in a different unit of measure.

<

7/6

During the display, hold down the button in the 
turn signal lever until the display changes.

If the outside temperature falls below approx. 
+37.5

7/+36, the computer switches auto-

matically to the outside temperature display. 
In addition, an acoustic signal sounds and the 
display flashes for a short time. There is an 
increased risk of icy conditions.

After an outside temperature warning has 
been issued, the display returns to the 

previous setting. You can have this activated/
deactivated.

<

Ice can also occur at temperatures 
greater than +37.5

7/+36. For this rea-

son, drive carefully on bridges and shaded 
roadways, for example. Otherwise, there is an 
increased risk of accidents.

<

If your vehicle is equipped with a computer, you 
can have the time displayed in the 12 or 24 hour 
mode.

 Online Edition for Part no. 01 41 0 013 638 - © 03/07 BMW AG