BMW 2007 X3 3.0si SAV Manual Do Proprietário

t a

lanc

riv

g tip

ilit

The set time is transferred to the display of the
radio or displayed in the instrument cluster.

Display mode

Ignition key in position 0 or removed:
Press button

The time and display of the miles/kilometers
appear for a few seconds.

Computer

Mode selection

With the ignition key in position 1 or higher,
you can call up information from the computer
using the computer button in the turn signal
lever.
A new function appears each time you briefly
press the computer button.
The following information is displayed in the
sequence indicated:

Time

Outside temperature

Average fuel consumption

Cruising range

Average speed

With the ignition key in position 1 or higher, the
last active setting is displayed.

If you wish, you can display the following
functions in a different unit of measure.

Outside temperature

Changing units of measure

7/6

During the display, hold down the button in the
turn signal lever until the display changes.

Outside temperature warning

If the outside temperature falls below approx.
+37.5

7/+36, the computer switches auto-

matically to the outside temperature display.
In addition, an acoustic signal sounds and the
display flashes for a short time. There is an
increased risk of icy conditions.

After an outside temperature warning has
been issued, the display returns to the

previous setting. You can have this activated/
deactivated.

Ice can also occur at temperatures
greater than +37.5

7/+36. For this rea-

son, drive carefully on bridges and shaded
roadways, for example. Otherwise, there is an
increased risk of accidents.

Clock

12 or 24 hour mode

If your vehicle is equipped with a computer, you
can have the time displayed in the 12 or 24 hour
mode.