Brinly-Hardy Lawn Aerator PA-40 BH ユーザーズマニュアル

Should rust develop, sand lightly and then paint area with

enamel.

Periodically check all fasteners for tightness.

Apply a drop of lubricating oil to each Nylon Bearing and the

Aerator Axle before each use.

To prevent rust on plugging spoons, apply a light coat of

oil on the working areas of spoons after each use. Should

rust appear on any other part of your Aerator, sand lightly to

remove rust and coat lightly with enamel.

Plugging spoons are manufactured with special steels and

are heat treated to resist wear of abrasive soil. Striking

sub-surface objects can cause spoon breakage. Contact

our Customer Service Department to purchase replacement

Plugging Spoons (Part# B-4855-10). See “GETTING

QUALITY SERVICE”.

Periodically check the spoons remove any debris which

might build up and restrict their action.

After each use, service unit as described and store in a dry

area, shielding tines to avoid injury.

Maximum Towing Speed ............................................. 5 MPH

Aerator Capacity .........................................................200 lbs.

Empty Weight ...............................................................90 lbs.

Maximum Towing Weight ............................................290 lbs.

Recommended Tire Pressure ........................Semi pneumatic

The weight required to give a recommended penetration

of approximately two to three inches will vary according

to soil type and conditions. Concrete blocks, patio blocks,

sand bags, or any other type of weight can be added to

Aerator Tray as required. Weight can be secured by using

tie downs through holes in Tray Flanges. Tie downs are not

furnished with your unit. Usually three Concrete Blocks will

be sufficient, but more or less weight may be required.

Drive your tractor to location to be Aerated.

•

Lower Aerator to Operating Position.

•

Drive the Tractor FORWARD approximately ten feet and

•

stop.

Observe the operation- there should be a Plug hole

•

approximately every ten to twelve inches and not more

than three inches deep.

Add or remove weight to obtain this condition.

•

The key to years of trouble-free service is to keep your

Aerator clean and dry.

Never allow wet material to remain in Tray for extended

periods of time.

Occasionally check all moving parts for free movement and,

if necessary, lubricate with oil.

Maximum Towing Speed ............................................. 5 MPH

Aerator Capacity .........................................................150 lbs.

Empty Weight ...............................................................66 lbs.

Maximum Towing Weight ............................................216 lbs.

Recommended Tire Pressure ........................Semi pneumatic

We provide a process to remedy your questions or problems.

Follow the steps below to get answers to any questions you may have about your product, or to order replacement parts:

1. Refer to your attachment and machine operator manuals.

2. In North America and Canada, call 1-877-728-8224 and provide product serial number and model number.