Boxlight XD-5m ユーザーズマニュアル
23
Controls Menu
F
IGURE
16
Controls menu
Video Standard
NOTE: If you already know the
video standard used in your geo-
graphical area, it’s often best to
manually select it.
When Video standard is set to Auto, the projector attempts to
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
or SECAM) automatically based on the input signal it receives.
(The video standard options may vary depending on your region
of the world.) If the projector is unable to detect the correct stan-
dard, the colors might not look right or the image might appear
“torn.” If this happens, manually select a standard by clicking the
left or right navigation button and cycling through the standards.
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
or SECAM) automatically based on the input signal it receives.
(The video standard options may vary depending on your region
of the world.) If the projector is unable to detect the correct stan-
dard, the colors might not look right or the image might appear
“torn.” If this happens, manually select a standard by clicking the
left or right navigation button and cycling through the standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among 1, 5, 10, and 15
minutes and 1 and 2 hours by clicking the left or right navigation
button and cycling through the options.
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among 1, 5, 10, and 15
minutes and 1 and 2 hours by clicking the left or right navigation
button and cycling through the options.