Boxlight XD-5m ユーザーズマニュアル

When you turn 

on, the projector reverses the 

image so you can project from behind a translucent screen. High-
light Rear Projection, then click the left or right navigation button 
to turn this feature on and off.

Default Source toggles between Computer and Video. This deter-
mines which source the projector checks first for active video 
during power-up. Highlight Default Source and click the left or 
right navigation button to toggle between the options.

This setting toggles between On and Off. When this feature is Off, 
the projector defaults to the source selected in Default Source. To 
display another source, you must manually select one by press-
ing the 

 button on the keypad or the 

 or 

 but-

ton on the remote. When this feature is On, the projector 
automatically finds the active source, checking the default source 
first. Highlight Auto Source Select and click the left or right navi-
gation button to turn this feature on and off.

This setting toggles between On and Off. When it is On, most 
new computers will automatically recognize the projector, then 
set the monitor resolution and refresh rate accordingly. You need 
to set the Plug and Play setting to Off for the projector to display 
properly on some older computers. The Plug and Play setting 
does not affect video images. 
If the projector’s display constantly changes between the com-
puter image and the message, “Perfecting the image”, you may 
need to turn Plug and Play Off.

This setting toggles between On and Off. When this feature is On, 
status messages such as “No signal detected” or “Standby 
Active” appear in the lower-right corner of the screen. Click the 
left or right navigation button to turn this feature off and not see 
status messages.