Woodstock W1675 ユーザーズマニュアル

-11-

Planer Base

Mounting

Surface

Figure 9. Hardware mounting assembly.

For proper results and safe use, the Model
W1675 must be mounted to a sturdy workbench
or a stand like the 

®

Tool Stand

shown in 

Figure 7. Mounting hardware is not

included.

Determine the length of mounting bolts you
will need by adding the thickness of your
mounting surface and the base of the
planer. 

With the help of an assistant set the planer
in the desired position on the mounting

surface. See 

Figure 8.

Use a pencil to mark the positions of the
mounting holes from the base of the planer.

Drill a 

1

⁄

2

" hole into your mounting surface

in each of these positions.

Secure the planer with the mounting
hardware. 

Figure 9 shows the proper order

of the mounting hardware placement. 

Insert a  

1

⁄

2

" diameter bolt, two flat washers

(1 for top, 1 for bottom), and thread on a
lock washer (for behind nut), and a hex nut
to secure the planer at each corner.

®

Tool Stand.

Figure 8. Planer in mounted position.