Whirlpool Washer ADG 6500 ユーザーズマニュアル
GB -3-
Daily check
3
Check the rinse aid indicator to check the level
into the dispenser.
into the dispenser.
(depending on the model)
Rinse aid indicator on the control panel
Rinse aid indicator on the control panel
Rinse aid indicator on the dispenser
The indicator lamp lights up when RINSE AID NEEDS
TO BE ADDED.
TO BE ADDED.
dark: OK.
clear: NEEDS TO BE ADDED
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the
appliance.
appliance.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty
drying and a higher rinse aid setting will not improve the situation.
drying and a higher rinse aid setting will not improve the situation.
Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder detergent). Detergents with
rinse aid incorporated tend to form excess suds.
rinse aid incorporated tend to form excess suds.
Daily use
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations
Open the cover A
(press the dedicated button).
Only fill the
detergent dispenser
prior to starting a
wash program.
detergent dispenser
prior to starting a
wash program.
Shut the cover
by pressing dedicated ribs.
Insert detergent: Tablet / powder / liquid into the big chamber
Use only one tablet per one cycle, only
placed in detergent dispenser.
placed in detergent dispenser.
All types of tablets can be used, but for
2 in 1 type adding of salt is mandatory.
2 in 1 type adding of salt is mandatory.
If required,
open the
cover B
(press the
dedicated
button).
open the
cover B
(press the
dedicated
button).
Add rinse aid
to the max.
line ~150 ml
to the max.
line ~150 ml
The rinse aid dosage can be
adjusted to the detergent used.
The lower the setting, the less
rinse aid is dispensed (factory
setting: position 4).
Press the button to open the
cover B. Using a coin or similar
object, turn the arrow to the
desired setting. After adjusting
the rinse aid setting, shut the
cover again.
adjusted to the detergent used.
The lower the setting, the less
rinse aid is dispensed (factory
setting: position 4).
Press the button to open the
cover B. Using a coin or similar
object, turn the arrow to the
desired setting. After adjusting
the rinse aid setting, shut the
cover again.
Visual
indicator
indicator
2
Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator