Whirlpool MEDB850YG インストール手順

64 ft. (20 m)

54 ft. (16.5 m)

44 ft. (13.4 m)

35 ft. (10.7 m)

27 ft. (8.2 m)

58 ft. (17.7 m)

48 ft. (14.6 m)

38 ft. (11.6 m)

29 ft. (8.8 m)

21 ft. (6.4 m)

The Vent System Charts provide venting requirements that 

will help achieve best drying performance.

 

■

Select route that will provide straightest and most direct  

path outdoors.

 

■

Plan installation to use fewest number of elbows and turns.

 

■

When using elbows or making turns, allow as much room  

as possible.

 

■

Bend vent gradually to avoid kinking.

 

■

Use as few 90° turns as possible.

 

■

Use following Vent System Chart to determine type of vent 

material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified  

in Vent System Chart. Exhaust systems longer than those 

specified will:

 

■

Shorten life of dryer.

 

■

Reduce performance, resulting in longer drying times  

and increased energy usage.

Exhaust vent must be securely fastened to a noncombustible 

portion of mobile home and must not terminate beneath the 

mobile home. Terminate exhaust vent outside. 

Moblie Home Exhaust installation

If you prefer, dryer may be converted to exhaust through  

the bottom. You must contact your local dealer to have  

dryer converted.

A

B

  

A. Standard rear offset exhaust installation 

 

B. Bottom exhaust installation

Venting systems come in many varieties. Select the type best 

for your installation. Two close-clearance installations are shown. 

Refer to the manufacturer’s instructions.

A

B

  

 

  

 A.  Over-the-top  installation   

    (also available with one offset elbow) 
B. Periscope installation

NOTE: The following kits for close clearance alternate 

installations are available for purchase. Contact your local dealer.

 

■

Over-the-Top Installation: 

Part Number 4396028

 

■

Periscope Installation (For use with dryer vent to wall vent 

mismatch):
Part Number 4396037 - 0" (0 mm) to 18" (460 mm) mismatch

  

Part Number 4396011 - 18" (460 mm) to 29" (737 mm)  

 mismatch

  

Part Number 4396014 - 29" (737 mm) to 50" (1270 mm)    

 mismatch