On-Q/Legrand HMS 1100 ユーザーズマニュアル

Page 48

The arrow keys are used to scroll through the programs. Pressing the ' # ' key while a particular program is displayed will allow
that program to be edited or deleted. The display shows:

SHOW PROGRAM

1=EDIT

2=DELETE

Press the 1 (EDIT) key to edit the selected program. The Edit Program menu is displayed which allows the various
parts of the program to be changed - See Edit Program. Edit each part of the program as specified under Edit Program.
Press the ' # ' key at the Edit Program menu to show the newly edited program. Press the ' # ' key again to save the
program, or press the ' * ' key to cancel edit of this program and return to reviewing the programs.

Press the 2 (DELETE) key to delete the selected program.

3 = Delete All Programs

To delete All automation programs, from the Set Up Program menu, press the 3 (DELETE) key. The display will prompt you to
confirm the deletion.

DELETE ALL PROGRAMS?

0=NO

1=YES

Select 1 (YES) to delete all automation control programs in the system. Select 0 (NO) or press the ' * ' key to return to the Set Up
Program menu.

NOTE: IF YOU CHOOSE THIS OPTION, ALL OF YOUR PROGRAMS WILL BE LOST PERMANENTLY.

Edit Programs

The Edit Program menu is used to specify each part of an automation program.

EDIT

PROGRAM

1=WHEN 2=CMD 3=&COND

•

Selecting 1 (WHEN) allows the time or event that activated the program to be specified.

•

Selecting 2 (CMD) allows you to specify the action to be taken when the program is executed.

•

Selecting 3 (&COND) allows a condition to be specified that must be true for the program to be executed at the
specified time.

Each of these items defaults to its current setting for an existing program that is being edited, or to a default value for a new
program.

For each program, it is only necessary to specify the time or event and the action to be taken. It is not necessary to specify a
condition on the program if the action should be taken whenever the specified time or event occurs.