Omega FoodPro ユーザーズマニュアル

12

1. Rotate the Cover to the left until the    
   “tab” is unseated. 
 
2. Remove the Blade by pulling upward.  
    (If the blade is held in place by  
    ingredients, it may be removed with  
    the Work Bowl) 
 
3. Rotate the Main Handle to the left  
    until it is unseated and lift off of the  
    motor housing.

1. Place the large work bowl onto the  
    motor housing with the main handle  
    to the left of the power panel. This  
    aligns the bowl to properly engage  
    the safety interlock. Turn the main  
    handle to the right until it “clicks”  
    or “locks” into place. The main  
    handle should now be centered  
    with the Power Panel. 
 
2. Place the Large Blade or Dough Blade 
    onto the main motor shaft. You may 
    have to rotate the blade partially to  
    properly “seat” onto the shaft. 
 
3. Place the Work Bowl Cover onto the 
    Work Bowl with the interlock “tab”  
    to the left of the main handle. Turn  
    the Cover to the right until it “clicks”  
    or “locks” into place. The “tab” should 
    now be aligned with the Main Handle.

1.

2.

3.