Omega FoodPro ユーザーズマニュアル

14

1. Place the large work bowl onto the 
    motor housing with the main handle  
    to the left of the power panel. This 
    aligns the bowl to properly engage the 
    safety interlock turn the main handle to 
    the right until it clicks” or “locks” into 
    place. The main handle should now be 
    centered with the Power Panel. 

2. The desired size of Slicing or Shredding 
    should be facing away from the adapter 
    when installing the disk 

3. Place the Slicing or Shredding disk  
    onto the Disc Adapter. Be sure to align 
    the center hole of the disk with the  
    disc adapter. 

4. Once the Adapter is inserted into the 
    Disk, rotate the disk until it is seated. 

5. Place the Adapter/Disk Assembly onto 
    the main motor shaft. You may have to 
    rotate the assembly partially to properly 
    “seat” onto the shaft. 

6. Place the Work Bowl Cover onto the 
    Work Bowl with the interlock “tab” to 
    the left of the main handle. Turn the 
    Cover to the right until it “clicks” or 
    “locks” into place. The “tab” should  
     now be aligned with the Main Handle.

1.

2.

3.

6.

4.

5.