Omega FoodPro ユーザーズマニュアル

17

1. Place the large work bowl onto the 
    motor housing with the main handle   
    to the left of the power panel. This 
    aligns the bowl to properly engage the 
    safety interlock. Turn the main handle 
    to the right until it “clicks” or “locks” 
    into place. The main handle should 
    now be centered with the Power Panel. 
 
2. Inset the Min Chopper Bowl into the 
    Large Work Bowl. You may have to 
    rotate the bowl until it is properly 
    seated. The Mini Chopper Bowl is  
    not properly inserted if it can still  
    be rotated. 
 
3. Place the Mini Blade onto the main 
    motor shaft. You may have to rotate 
    the blade partially to properly “seat” 
    onto the shaft. 
 
4. Place the Work Bowl Cover onto the 
    Work Bowl with the interlock “tab” 
    to the left of the main handle. Turn 
    the Cover to the right until it “clicks”  
    or “locks” into place. The “tab” should 
    now be aligned with the Main Handle.

1.

2.

3.

4.