Omega FoodPro ユーザーズマニュアル
16
The Food Pro will not operate until the
Large Work Bowl and the Work Bowl
Cover are both properly installed. Once
installed, the indicator light will remain lit
if the unit has power.
Large Work Bowl and the Work Bowl
Cover are both properly installed. Once
installed, the indicator light will remain lit
if the unit has power.
On
– Once pressed, the Food Pro will
run continuously.
Off
– Stops the Food Pro. The indicator
light will remain on.
Pulse
– The Food Pro will run only when
pressed. Short bursts can give more
accurate results.
accurate results.
NOTE: If the unit fails to operate, make sure the work
bowl and cover are properly locked on the base.
bowl and cover are properly locked on the base.
Inserting Ingredients – Wide Plunger w/
plunger insert
plunger insert
Items should be placed into the Feed
Chute. If needed, use the Wide Plunger
to push items down the feed chute. If
more consistent slicing is desired when
slicing slender items, the Narrow Plunger
Insert can be used. Rotate the Plunger
Insert partially to unlock the insert from
the Wide Plunger. Place the Wide Plunger
into the Feed Chute. Place slender items
(example: carrots) into the narrow feed
chute and use the insert plunger to push
the items down the feed chute.
Chute. If needed, use the Wide Plunger
to push items down the feed chute. If
more consistent slicing is desired when
slicing slender items, the Narrow Plunger
Insert can be used. Rotate the Plunger
Insert partially to unlock the insert from
the Wide Plunger. Place the Wide Plunger
into the Feed Chute. Place slender items
(example: carrots) into the narrow feed
chute and use the insert plunger to push
the items down the feed chute.
USING – SLICING OR SHREDDING DISK POWER PAD
ON
OFF
PULSE