ONKYO A-9155 ユーザーズマニュアル
13
Connecting the A-9355/A-9155—Continued
Connecting
Components
With
(Remote Interactive), you can control your
-compatible Onkyo CD player, Tuner, and so on
with the A-9355/A-9155’s remote controller.
If you connect other Onkyo components to the
A-9355/A-9155 with the appropriate
If you connect other Onkyo components to the
A-9355/A-9155 with the appropriate
and audio
cables, you can use the following system functions.
cables are special cables solely for use with Onkyo
products (no
products (no
cables are supplied with the
A-9355/A-9155).
When you set the A-9355/A-9155 to Standby, all con-
nected components will go on Standby as well (the
A-9355/A-9155’s POWER switch must be set to ON for
this to work).
nected components will go on Standby as well (the
A-9355/A-9155’s POWER switch must be set to ON for
this to work).
Direct Change
When playback is started on an audio component con-
nected via
When playback is started on an audio component con-
nected via
, the A-9355/A-9155 will automatically
select that component as the input source.
Remote Control Operation
You can control all components in your system by using
the A-9355/A-9155’s remote controller. See page 8 and
9 for more information.
You can control all components in your system by using
the A-9355/A-9155’s remote controller. See page 8 and
9 for more information.
• To use
, you must make an analog audio con-
nection between the A-9355/A-9155 and each
audio component.
audio component.
Notes:
• Push each plug in all the way to make a good connec-
• Push each plug in all the way to make a good connec-
tion.
• A-9355: The A-9355 has two
jacks. If you want
to connect two or more audio components to the A-
9355, it is advisable to connect any of two compo-
nents directly to the A-9355 for better audio quality,
in stead of linking all the components using the daisy
chain method.
9355, it is advisable to connect any of two compo-
nents directly to the A-9355 for better audio quality,
in stead of linking all the components using the daisy
chain method.
• Use only dedicated
cables for
connections
(no
cables are supplied with the
A-9355/A-9155).
• The A-9355 has two
jacks. They’re all the same,
so you can use either of them.
•
jacks should be connected only to Onkyo compo-
nents. Connecting them to another manufacturer’s
component may cause the A-9355/A-9155 to mal-
function.
component may cause the A-9355/A-9155 to mal-
function.
• Some components may not support all
functions.
See the manuals supplied with your other Onkyo
components for more information.
components for more information.
Connecting Another Component’s Power
Cord
Cord
The A-9355/A-9155 has a switched AC OUTLETS on
its rear panel. These can be used to connect the power
cord of another audio component that you intend to use
with the A-9355/A-9155.
After you power on the A-9355/A-9155, you can feed or
shut off power to the connected component by turning
on or off the remote controller switch. Use the AC outlet
of the A-9355/A-9155 to feed only components that
have no STANDBY/ON function, like Onkyo DX-7355
CD player. For Onkyo products equipped with
its rear panel. These can be used to connect the power
cord of another audio component that you intend to use
with the A-9355/A-9155.
After you power on the A-9355/A-9155, you can feed or
shut off power to the connected component by turning
on or off the remote controller switch. Use the AC outlet
of the A-9355/A-9155 to feed only components that
have no STANDBY/ON function, like Onkyo DX-7355
CD player. For Onkyo products equipped with
ter-
minals that have a STANDBY/ON function, allocate a
normal outlet that is energized on a steady basis.
normal outlet that is energized on a steady basis.
Note:
Do not connect any other devices than audio compo-
nents.
Do not connect any other devices than audio compo-
nents.
Caution:
Make sure that the maximum power requirement of the
component connected to the AC OUTLETS do not
exceed the capacity printed on the A-9355/A-9155’s
rear panel (100W).
Make sure that the maximum power requirement of the
component connected to the AC OUTLETS do not
exceed the capacity printed on the A-9355/A-9155’s
rear panel (100W).
Onkyo CD player
(DX-7355), etc.
(DX-7355), etc.
A-9355/A-9155
connector
Remote control cable
connector
Onkyo Tuner, etc.
Remote Interactive
Dock, etc.
Dock, etc.
connector
A-9355