Electrolux OHV ユーザーズマニュアル

30

31

1)  Remove control panel (see section 7.11              
above, for Control Panel removal instructions)

1) Remove control panel (see section 7.11).

3)  Remove spring from deflector, if applicable.
4)  Remove 9/16

"

 nut holding control rotator 

head to tubular support, and remove cable 
assembly from the chute.  The chute will not 
be retained at the top, DO NOT drop chute.

5)  Cut all cable ties noting locations, and 

paying attention to the routing of cable 
particularly at the lower handle.

6)  Reverse process to install new cable.  Install 

new plastic ties to hold cables.

2)  Remove both 5/16

"

 screws holding rotator 

control to handle assembly.

4) Remove both 5/16" screws that secure cable 
assembly to the handle assembly.
5) Cut the cable ties that secure the cable to 
the snowthrower, paying attention to the routing 
of the cable and the location of ties.
6) Reverse process to install the cable and new 
plastic ties.

2) Remove the nut and washer that secure the 
cable eyelet to the deflector.
3) Remove the nut, washer and bracket that 
secure cable to the chute. 

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com