Compaq 326817-003 ユーザーズマニュアル
4-12 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
LCD Messages
Front panel LCD messages are provided in list Table 4-1.
Table 4-1
LCD Messages - Alphabetical Listing
LCD Message
Message
Type
Meaning
Cassette Stuck In
Drive
Drive
Error
A cassette is stuck in the drive.
Cleaning
in
Process
in
Process
Status
A cleaning cassette has been loaded into the drive
mechanism and is cleaning the heads. The cleaning cassette
will be automatically returned to the magazine when the
cleaning cycle is complete.
mechanism and is cleaning the heads. The cleaning cassette
will be automatically returned to the magazine when the
cleaning cycle is complete.
Cleaning
Failed
Failed
CleanReq
Error
The cleaning cassette is used up. Replace the cleaning
cassette and discard the old one.
cassette and discard the old one.
CleanReq
Error
It is time to clean the heads on the drive or a high error rate
has been detected reading or writing. Move the cleaning
cassette from the magazine to the drive (if necessary, load a
cleaning cassette into the magazine). The cleaning cycle will
automatically start once the cleaning cassette is loaded in the
drive. See “Cleaning in Process.”
has been detected reading or writing. Move the cleaning
cassette from the magazine to the drive (if necessary, load a
cleaning cassette into the magazine). The cleaning cycle will
automatically start once the cleaning cassette is loaded in the
drive. See “Cleaning in Process.”
Drv HW
Error
Error
04xxxxxx
Error
This is an embedded-drive hardware error. In some cases the
SCSI error code generated will be displayed on the 3
SCSI error code generated will be displayed on the 3
rd
line as
M4sxxsxx where the xx’s represent the additional sense code
and qualifier.
and qualifier.
Eject
Prevent
Prevent
Info
This is displayed when the SCSI command “PREVENT MEDIA
REMOVAL” has been set, and the Eject button has been
pressed. Th SCSI command prevents the cassette or
magazine from ejecting.
REMOVAL” has been set, and the Eject button has been
pressed. Th SCSI command prevents the cassette or
magazine from ejecting.
Ejecting
Magazine
Magazine
Info
This is displayed after the Eject button is pressed and the
magazine is being ejected.
magazine is being ejected.
continued