Compaq 326817-003 ユーザーズマニュアル
4-14 Compaq DAT AutoLoader Reference Guide
Compaq Confidential – Need to Know Required
Writer: Debbie McRill Project: Compaq DAT AutoLoader Reference Guide Comments:
Part Number: 326817-003 File Name: e-ch4 Operation.doc Last Saved On: 12/20/99 2:35 PM
Table 4-1
LCD Messages - Alphabetical Listing
LCD Messages - Alphabetical Listing
continued
LCD Message
Message
Type
Meaning
Move
Medium
x => Mag
Medium
x => Mag
Error
Moves cassette x from the drive to the magazine, where x
represents the cassette number.
represents the cassette number.
No Magazine
Status
There is no magazine in the AutoLoader. The DAT AutoLoader
is ready for a magazine to be inserted.
is ready for a magazine to be inserted.
Read
Tape x
Tape x
Status
Cassette x is being read.
x represents the number of the cassette.
x represents the number of the cassette.
Ready
Status
A magazine has been loaded in the AutoLoader and the
Autoloader has completed scanning the cassettes and is
ready for operation.
Autoloader has completed scanning the cassettes and is
ready for operation.
Ready
Tape x
Tape x
Status
Cassette x has been loaded into the drive and is ready for
operation. x represents the number of the cassette.
operation. x represents the number of the cassette.
Scan 1
Scan 2, etc
Scan 2, etc
Status
The DAT AutoLoader is examining the cassettes in the
magazine to check for proper magazine loading and
configuration.
magazine to check for proper magazine loading and
configuration.
Select
Prevent
Prevent
Info
This message is displayed if the SCSI command “PREVENT
MEDIA REMOVAL (LUN=0)” has been sent and the Select
button is pressed.
MEDIA REMOVAL (LUN=0)” has been sent and the Select
button is pressed.
Select x
Load
Tape x
Load
Tape x
Info
The cassette that has been selected is moving from the
magazine into the drive.
magazine into the drive.
Select x
Push ENT
Push ENT
Info
Pressing the Select button displays the message “Select x”.
If Select is pressed again, x will increment to the next
cassette, else the “Push ENT” will also be displayed. To load
cassette x press the Enter button. If no button is pushed for a
couple seconds, the command is cancelled. x represents the
cassette number.
If Select is pressed again, x will increment to the next
cassette, else the “Push ENT” will also be displayed. To load
cassette x press the Enter button. If no button is pushed for a
couple seconds, the command is cancelled. x represents the
cassette number.
Select x
Unload
Tape y
Unload
Tape y
Info
Cassette y is being returned to the magazine from the drive
so that cassette x can be loaded.
x and y represent different cassette numbers.
so that cassette x can be loaded.
x and y represent different cassette numbers.
Send Diag
Checking
Mecha
Checking
Mecha
Status
The diagnostics are checking the AutoLoader mechanics,
such as the elevator, and so on.
such as the elevator, and so on.
continued