Alarm Lock Trilogy PDL3000 開発者ガイド
8
USER TYPE
USER NUMBER
GROUP DEFAULT
ASSOCIATION
MINIMUM PROGRAM
LEVEL (See page 6)
Master Code
1
-
M
Installer Codes
2 & 3
none
4
Manager Codes
4 - 6
none
3
Supervisor Codes
7 - 9
none
2
Print Only Codes
10 - 11
none
1
Basic User Codes
12 - 50
none
none
Basic User Codes Group 1
51 - 100
1
none
Basic User Codes Group 2
101 - 150
2
none
Basic User Codes Group 3
151 - 200
3
none
Basic User Codes Group 4
201 - 250
4
none
Basic User Codes
251 - 296
none
none
Quick Enable User 300 Code
297
none
none
Quick PC Access Code
298
none
none
AL-DTM Code
299
none
none
Service Code
300
none
none
Basic User Codes
301-2000
none
none
Lock Defaults for PDL3000/3500 & ETPDL
Users added will default to a Group Association and a Program Level Ability as follows:
User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.
NOTES:
The Programming Level defines the range of programming tasks
a User is allowed to perform. The higher the Level, the more pro-
gramming tasks the User is allowed (with Master allowing ALL
tasks).
a User is allowed to perform. The higher the Level, the more pro-
gramming tasks the User is allowed (with Master allowing ALL
tasks).
Note: Since the Programming Level is closely associated with
the type of User and their abilities, a User who holds a certain
Programming Level is sometimes referred to by their “User
Type”.
the type of User and their abilities, a User who holds a certain
Programming Level is sometimes referred to by their “User
Type”.
For example, PDL Series locks can hold up to 2000 Users in its
programming memory, and each User is associated with a User
Number (see definition of "User Number" in the previous
"Terminology" section) and therefore a specific Programming
Level, as follows:
programming memory, and each User is associated with a User
Number (see definition of "User Number" in the previous
"Terminology" section) and therefore a specific Programming
Level, as follows:
Master: Always associated with User number 1. Is always en-
abled and can program all functions. (Abbreviated as
Programming Level = M).
Programming Level = M).
Installer: Always associated with Users 2 and 3. Can program
all functions except changing the Master Code. (Abbreviated
as Programming Level = 4).
Manager: Always associated with Users 4, 5, and 6. Can pro-
gram all functions except functions relating to lock
configuration. (Abbreviated as Programming Level = 3).
configuration. (Abbreviated as Programming Level = 3).
Supervisor: Always associated with Users 7, 8 and 9. Can only
program functions relating to day to day operation.
(Abbreviated as Programming Level = 2).
(Abbreviated as Programming Level = 2).
Print Only Users: Always associated with Users 10 & 11.
Restricted to print audit trails only. No other programming
ability allowed. (Abbreviated as Programming Level = 1).
ability allowed. (Abbreviated as Programming Level = 1).
Basic Users: Always associated with User number 12 and
higher (except 297-300). No programming ability allowed.
Programming Levels are hierarchical--higher levels are allowed to
do anything the levels below them can do. For example, if you
are a Manager, you are allowed to do anything that Supervisors,
Print-Only Users and Basic Users can do in addition to those
tasks allowed for Managers (Level 3).
Programming Levels