Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Moeller Marine
  4. XControl PLC System AWB2700-1428GB
  5. ユーザーズマニュアル

Moeller Marine XControl PLC System AWB2700-1428GB ユーザーズマニュアル

ダウンロード
ページ / 54
Functions of the Operator 
Module
12/01 AWB2700-1428GB
38
This change will show that the function has been completed.
Handling several programs
Several bootable programs can be loaded and stored on the hard 
disk of the XC600. The last program loaded is activated by the 
system. A program that is already activated will be deactivated.
Every time the XC600 is switched on and the LOAD or REBOOT 
menu items are called, the PLC generates an executable program 
from the activated program and stores it in the working memory. 
This will overwrite any executable program that is present.
The program in the working memory can then be started.
A program can be changed by activating the required program:
X
Use the MSS to choose MAIN MENU r PROGRAM r 
INTERNAL r ACTIVATE.
The name of the loaded and executable program is displayed. It is 
marked by a large period character.
X
Turn the MSS to the right. 
The names of other programs will appear in turn.
X
Select a name (cursor flashes at the side of the name).
X
Press the MSS. Turn the MSS so that the text ENTER appears 
instead of menu item BACK. 
X
Press the MSS.
This will display the next higher menu. 
X
Carry out a restart with the OMS set to RUN-P or RUN, or 
choose LOAD or switch the XC600 off and on again.
The new program is started. 
Deleting programs
Programs are basically deleted in the same way as previously 
described.
Both the activated bootable program as well as another bootable 
program can be deleted.
Copying programs
Copying is possible between the hard disk and the CompactFlash 
card:
If you wish to copy from the hard disk:
X
Use the MSS to choose MAIN MENU r PROGRAM r 
INTERNAL r COPY. 
If you wish to copy from the CompactFlash card:
X
Use the MSS to choose MAIN MENU r PROGRAM r 
EXTERNAL r COPY.
The name of the loaded and executable program is displayed. It is 
marked by a large period character.
X
Turn the MSS to the right. 
The names of other programs will appear in turn.
X
Select a name (cursor flashes at the side of the name).
X
Press the MSS. Turn the MSS so that the text ENTER appears 
instead of menu item BACK. Press the MSS. 
The next higher menu is displayed and the copy operation is 
completed. 
Editing programs on the CompactFlash card (CFC) 
Proceed as follows to save programs on the CFC:
X
First load programs onto the hard disk with XSoft.
X
Then copy the programs via the XC600 menu to the CFC. 
The original program will be kept on the hard disk.
Both programs can be deleted independently of each other. 
The programs on the CompactFlash card and on the hard disk are 
treated in the same way. The CompactFlash card can be accessed 
via MAIN MENU r PROGRAM r EXTERNAL r ---.
Copy and delete operations are carried out in the same way as on 
the hard disk.
A bootable program can also be activated on the CompactFlash 
card. A previously activated program will be deactivated (this also 
applies to programs that are saved on the hard disk). Every time 
the XC600 is switched on and the LOAD or REBOOT menu items 
are called, the PLC generates an executable program from the acti-
vated program and stores it in the working memory. 
This will overwrite any executable program that is present.
When you delete the program on the CompactFlash card, the 
executable program is retained until the next reboot, load or 
startup operation.
h
Only one single executable program can be activated at a 
time!
17:22:37
#
STOP
PRONAM.PRO
>MAIN MENU
h
Only bootable programs can be copied!