Bosch 500 ユーザーズマニュアル

en | MIC 500 Series Camera Quick Start Guide

MIC Series 500 Camera

F.01U.173.601 | 2.0 | 2010.11

User’s Manual

Bosch Security Systems, Inc.

The upright unit can be mounted with the camera ball up or down. 

For inverted units, first remove the four M3 x 6 screws fixing the rain shield to the face of the 

camera, reverse the rain shield, reattach it to ensure that the rain shield is oriented correctly, 

and then configure the camera for inverted operation. For further details of configuring and 

reversing the controls for inverted units using the MIC Series Universal Camera Setup 

Software (cam-set) or via the MIC 500 Series camera on-screen menu, please refer to the Help 

and Instruction file in cam-set.

The MIC 500 Series camera, when canted, is designed only to be mounted ball up. The tilt 

limits for the canted unit prevent it from working properly if mounted ball down. Do not 

manually back drive the pan or tilt axis by hand. Back driving may strip teeth off the internal 

gears and in so doing will void the warranty.

M8 Stainless steel nuts, bolts, and washers should be used to secure the base to the 

mounting surface. Suitable sealant or the Nebar gasket may be used between the camera 

base and the mounting surface.

Ensure that the 12-pin connector is located inside the camera base plug and that the lock ring 

is tightened. Ensure that the base compartment containing the 12-way connector is moisture 

proof. On inverted units, it is very important that the connector area is watertight to prevent 

water pooling around the connector.

MIC 500 Series camera mounting positions: Inverted, Upright, and Canted

To reduce the risk of electrical shock, disconnect power supply before opening the power 

supply unit.

Power disconnect: power supply units have power supplied whenever the power cord is 

inserted into the power source.

Installation should be carried out by qualified personnel only in accordance with the 

applicable local codes.

Bosch Security Systems Inc. accepts no liability for any damages or losses caused due to 

incorrect or improper installation.