Wyse Network Router 1 ユーザーズマニュアル

Chapter 3

Use the following guidelines:
• Default Printer - Select the printer you want to be the default printer from the list.
• Enable .print Client and Port - If you want to enable .print Client, select Enable .print 

Client and then enter the port.

The Help tab contains printer help information.

A thin client can be configured to provide LPD (Line Printer Daemon) services, making the 
thin client a printer server on the network. 

Set-up the thin client that is to provide LPD print services as follows:

1. Open the Network Setup dialog box (Desktop Menu | System Setup | Network) and 

enter a static IP address for the thin client (ask your network administrator for an IP 
address).

2. Open the Printer Setup dialog box (Desktop Menu | System Setup | Printer) and 

select any of the listed ports.

3. Name the printer in the Printer Name box.

4. Select Enable LPD service for the printer.

5. Select Enable the Printer Device.

6. Set up the application server as described in either “Setting Up Windows NT4 Servers”  

or “Setting Up Windows 2000/2003 Servers” .

1. Navigate to Control Panel | Network | Services and ensure that the Microsoft TCP/IP 

Printing service is installed. If it is not, install it using the Microsoft installation 
instructions.

2. Add the thin client as the LPD printer by completing the following:

a. Navigate to Control Panel | Printers | Add Printers | My Computer | Add Port 

and double-click LPR PORT (if you do not see LPR Port, ensure that the Microsoft 
TCP/IP Printing service is installed correctly).