Zephyr ZGEE30AS290 オーナーマニュアル

Periodically clean with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent 

steel wool or scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners to polish and buff 

out the stainless luster and grain. Always scrub lightly with clean cotton cloth and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

The mesh f lter installed by the factory is intended to f lter out residue and grease from cooking.  It need not 

be replaced on a regular basis but is required to be kept clean.

Filter should be cleaned after every 30 hours of use or once a month.

Remove and clean by hand or in dishwasher on low heat.  Spray degreasing detergent and leave to soak if 

heavily soiled.

Dry f lter and re-install before using hood.

Should f lter wear out due to age and 

prolonged use, replace with the following part 

number:

All ZGE Models     50200036          1

Replace any damaged f lter that has punctured 

or broken mesh or damaged frame.

To remove decorative mesh f lter:

1. Pull down on handle.                                                                       

2. Tilt f lter down and remove from hood.

2

1