Gaggenau AI442720 使用とお手入れ

ページ / 48
12
Cleaning and maintenance
9
WARNING
Risk of burns
The appliance grows hot during operation. Let 
appliance cool down prior to cleaning.
9
WARNING
Risk of electric shock
Penetrating damp can cause electric shock. 
Only clean appliance with a damp cloth. Prior to 
cleaning, pull the plug or flip the breaker in the 
fusebox.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an 
electrical shock. Don't use a high-pressure 
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have 
sharp edges. Wear protective gloves.
Cleaning agents
To ensure that the different surfaces are not damaged 
by using the wrong cleaning agent, observe the 
information in the table. Do not use:
Harsh or abrasive cleaning agents,
Cleaning agents with a high alcohol content,
Hard scouring pads or cleaning sponges,
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the 
cleaning agents.
Degreaser (Product no. 00311297)
 
Intensive degreaser for effective removal of grease 
deposits in the extractor hood. Ideal for pre-treating 
metal grease filters.
Stainless steel care cloths (Product no. 00311134)
 
Used to care for stainless steel surfaces. Impregnated 
with special oil, prevents the accumulation of dirt and 
fingerprints.
Uninstalling metal grease filter
9
WARNING
Risk of injury
Metal grease filters and components inside the 
appliance may have sharp edges. Wear 
protective gloves.
9
WARNING
Risk of injury
The metal grease filters are very heavy. Remove 
the metal grease filters carefully and secure 
them against falling down when doing so.
The metal grease filter consists of three components. 
You can take the metal grease filters apart to facilitate 
cleaning. 
Area
Cleaning agent
Stainless steel
Hot soapy water: 
Clean with a dish cloth and then dry 
with a soft cloth.
Clean stainless steel surfaces in the 
grind direction only.
Special stainless steel cleaning prod-
ucts are available from our after-sales 
service or from specialist retailers.  
Apply a very thin layer of the cleaning 
product with a soft cloth.
Aluminum and 
plastic
Glass cleaner: 
Clean with a soft cloth. 
Glass
Glass cleaner: 
Clean with a soft cloth.  Do not use a 
glass scraper.
Controls
Hot soapy water: 
Clean using a damp dish cloth and dry 
with a soft cloth/towel.
Risk of damage to the electronics from 
penetrating moisture.  Never clean 
operating controls with a wet cloth.
Do not use any stainless steel cleaners.