Maytag MGT8720DH 使用とお手入れ

When power is first supplied to the range, or if a power failure has 
occurred, “12:00” will appear on the display. See “Clock” in the 
“Settings” section to set time of day.
When the oven is not in use, the display shows the time of day.

The Cancel pads stop any function except the Clock, Timer and 
Control Lock.

While the oven doors are closed, press OVEN LIGHT to turn the 
lights on and off. Both oven lights will come on when either door is 
open. The oven lights will not come on during the Self-Clean cycle.

The Kitchen Timer can be set in hours or minutes up to 9 hours and 
59 minutes, and counts down the set time. The Kitchen Timer does 
not start or stop the oven.

1. Press KITCHEN TIMER.

“Set TIMER” will scroll down the upper text display area, and 
the clock will display “--:--” with the colon flashing.

2. Press the Temp/Time “+” or “-” pads until the desired time is 

reached.
“Press TIMER” will scroll down the upper text display area.

3. Press KITCHEN TIMER to start the timer. The colon stops 

flashing, and the time begins counting down. “TIMER 
STARTED” will scroll down the upper text display area.
The last minute of the timer countdown will be displayed in 
seconds.

At the end of the set time, one long beep will sound, and 
“TIMER End” will be displayed.

4. Press KITCHEN TIMER to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is 
canceled.

Press KITCHEN TIMER.

Settings enables you to personalize audible tones and oven 
operation to suit your needs. After completing your adjustments, 
press a CANCEL key or wait 30 seconds for the display to show 
the time of day.

The temperature is factory preset to Fahrenheit, but can be 
changed to Celsius. 
1. Press SETTINGS once. 

“TEMP UNIT” will appear in the upper text area while 
“FAHRENHEIT. Press (+) for Celsius” will scroll twice from right 
to left in the lower text area.

2. Press the Temp/Time “+” pad to change the temperature unit 

setting.
“CELSIUS. Press (+) for Fahrenheit” will scroll twice from right 
to left in the lower text area.

3. “CELSIUS Selected” will scroll twice from right to left in the 

lower text area. The temperature units have been changed.

Tones are audible signals, indicating the following:

■

Valid pad press

■

End of Kitchen Timer (long tone)

■

Function has been entered

■

Oven is preheated

■

Invalid pad press

■

End of cycle

The oven sound is factory preset for On but can be changed to Off. 
1. Press SETTINGS twice until “SOUND” appears in the upper 

text area and “ON. Press (+) for OFF” scrolls twice from right to 
left in the lower text area.

2. Press the Temp/Time “+” pad to turn the sound Off. “OFF. 

Press (+) for ON” will scroll twice from right to left in the lower 
text area.

3. “OFF Selected” will scroll twice from right to left in the lower 

text area. The sound has now been turned off.

The oven sound is factory preset for High but can be changed to 
Low. 
1. Press SETTINGS 3 times until “SOUND VOLUME” appears in 

the text area and “HIGH. Press (+) for LOW” scrolls twice from 
right to left in the lower text area.

2. Press the Temp/Time “+” pad to turn the sound Low. “LOW. 

Press (+) for HIGH” scrolls twice from right to left in the lower 
text area.

3. “Low Selected” scrolls twice from right to left in the lower text 

area. The sound volume has now been changed.

The end tone is factory preset for On but can be changed to Off. 
1. Press SETTINGS four times until “END TONE” appears in the 

upper text area and “ON. Press (+) for OFF” scrolls twice from 
right to left in the lower text area.

2. Press the Temp/Time “+” pad to turn the end tone Off. “OFF. 

Press (+) for ON” will scroll twice in the lower text area.

3. “OFF Selected” will scroll twice from right to left in the lower 

text area. The end tone has now been turned off.

The keypress tone is factory preset for On but can be changed to 
Off. 
1. Press SETTINGS five times until “KEYPRESS TONE” appears 

in the upper text area and “ON. Press (+) for OFF” scrolls twice 
from right to left in the lower text area.

2. Press the Temp/Time “+” pad to turn the keypress tone Off. 

“OFF. Press (+) for ON” will scroll twice in the lower text area.

3. “OFF Selected” will scroll twice from right to left in the lower 

text area. The keypress tone has now been turned off.

The reminder tone is factory preset for On but can be changed to 
Off. 
1. Press SETTINGS six times until “REMINDER TONE” appears in 

the upper text area and “ON. Press (+) for OFF” scrolls twice 
from right to left in the lower text area.

2. Press the Temp/Time “+” pad to turn the reminder tone Off. 

“OFF. Press (+) for ON” will scroll twice in the lower text area.

3. “OFF Selected” will scroll twice from right to left in the lower 

text area. The reminder tone has now been turned off.