Zephyr ZSAM90C オーナーマニュアル

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent
or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and 
buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

The aluminum mesh fi lters installed by the factory are intended to fi lter out residue and grease from 
cooking.  They need not be replaced on a regular basis but are required to be kept clean.

Remove and clean by hand or in dishwasher on low heat.  Spray degreasing detergent and leave to soak if 
heavily soiled.

Dry fi lters and re-install before using hood.

1. Pull down on fi lter latch to disengage the springs

2. Pull down on fi lter hande to remove fi lter