Zephyr ZSAM90C オーナーマニュアル

www.zephyronline.com

    - Lights are two levels, High and Low.
    - From off, press one time for High. Press again for Low. Press again to power lights off.

    Mesh Filter Clean Reminder (always enabled)
    - After 30 hours of fan usage, the       button indicator will begin to slowly blink indicating it is time to  
      clean the mesh filters. 
    - To reset: With hood off: hold the      button for three seconds. All LED indicators will blink two times       
      confirming the 30 hour timer has been reset.  
    

Charcoal Filter Replace Indicator (disabled by default, must be enabled if recirculating hood)

    - To enable Charcoal Filter Replacement Reminder:

- With hood off, hold       button and       button simultaneously for two seconds. All LED indicators  

              will illuminate for three seconds confirming the Charcoal Filter Replace Reminder is enabled.
    - To disable Charcoal Filter Replacement Reminder:

- With hood off, hold       button and       button simultaneously for two seconds. All LED indicators  
  will blink two times confirming the Charcoal Filter Replace Reminder is disabled.

    - After 120 hours of fan usage the       button will slowly blink indicating the charcoal filters need   
      replacment. 
    - To reset: With hood off, hold the       button for two seconds. All LED indicators will blink two times  
      confirming the 120 hour timer has been reset.