Bosch HMD8451UC インストール手順

English 4

•  Remove all packing materials from inside the Drawer 

Microwave. DO NOT REMOVE THE WAVEGUIDE

COVER. The Waveguide Cover is attached to the 

ceiling of the Drawer Microwave. The mica cover is dark 

grey and cardboard-like, and  measures approximately 

9" x 10". The Waveguide Cover must remain in place 

at all times. Never allow children to play with packaging 

material.

•  Check the drawer for any damage, such as a misaligned 

or bent drawer, damaged drawer seals or sealing surfaces, 

broken or loose drawer guides or dents inside the cavity 

or on the front of the drawer. If there is any damage, do 

not operate the Drawer Microwave. Contact your dealer or 

Bosch Customer Support.

•  Unit is heavy and requires at least two people or proper 

equipment to move. 

•  Hidden surfaces may have sharp edges. Use caution 

when reaching behind or under appliance.

•  Read and understand the contents of this Installation 

Manual before installing the Drawer Microwave.

•  Remove all packing material before connecting the 

electrical supply.

•  It is the responsibility of the owner and the installer 

to assure compliance with all applicable safety codes 

and standards. See UL 923, The Microwave Cooking 

Appliances.

•  The unit may be installed using a standard or flush

(inset) installation per the following instructions.

Keep this manual with your Use and Care Manual for 

future reference.
•  As when using any microwave oven generating heat, 

there are certain safety precautions you should follow. 

These are listed in the Use and Care Manual. Read all 

and follow carefully.

•  Be sure your Drawer Microwave is installed and ground-

ed properly by a qualified installer or service technician.

The appliance should only be installed by a licensed 

electrician or a qualified technician.

Waveguide 

Cover

Sealing 

Surface

Oven Cavity

Sealing 

Surface