Gaggenau BS470611 オーナーマニュアル

You can use the appliance with or without a water 
filter.

It is recommended to install the descaling system 
GF 111 100 if the water hardness exceeds 7°dH 
(carbonate hardness 5°dH).

Filter cartridges should be replaced regularly. 
Replacement cartridges are available from after-sales 
service or in the online shop (order 
number GF 121 110).

The capacity of the filter cartridge depends on the 
frequency of use of the appliance and your regional 
water hardness. A message will appear in the display 
to remind you when the filter needs to be replaced. 
Regardless of the actual amount of water filtered the 
filter cartridge needs to be changed after 12 months 
at the latest. 

Set the function selector to 

. Select "Water filter 

change" using the rotary selector.

The 

œ

 symbol is displayed. Confirm with 

™

.

Change the water filter. Refer to the instructions 
included with the filter cartridge. Confirm with 

™

.

"Select water filter capacity” is shown in the 
display. Confirm with 

™

.

Turn the rotary selector to select the capacity of 
the filter cartridge (between 100 - 9000 liters). 
Confirm with 

™

.

The water filter change is complete. Touch the 

™

 

symbol. The appliance is now ready for operation.

The appliance is in the standby mode when no 
function is set or the child lock is activated.

The control panel's brightness is reduced in the 
standby mode.

‒

There are various displays for the standby mode. 
The GAGGENAU logo and the time are set by 
default. Refer to the section entitled 

 if you would like to change the display.

‒

The display's brightness depends on the vertical 
viewing angle. You can adjust the display by way 
of the "Brightness" setting in the factory settings.

In order to exit standby mode, you can either

▯

Set the function selector,

▯

Touch a control panel,

▯

or open or close the door.

Now you can set the desired function. Read the 
appropriate chapters to learn how to set functions.

‒

If "Standby display = off" is selected in the factory 
setting, you must turn the function selector to exit 
the standby mode.

‒

The standby display appears again if you have not 
made any settings for a long while after activation.

‒

The cooking compartment lighting goes out after 
a little while if the door is open.