Gaggenau AL400721 マニュアル

ページ / 44
12
Cleaning and maintenance
9
WARNING
Risk of burns
The appliance grows hot during operation. Let 
appliance cool down prior to cleaning.
9
WARNING
Risk of electric shock
Penetrating damp can cause electric shock. 
Only clean appliance with a damp cloth. Prior to 
cleaning, pull the plug or flip the breaker in the 
fusebox.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an 
electrical shock. Don't use a high-pressure 
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have 
sharp edges. Wear protective gloves.
Cleaning agents
To prevent various surfaces from becoming damaged 
due to incorrect cleaning agents, follow the 
specifications given in the table. Do not use
cleaning agents that are harsh or scouring,
cleaning agents with high alcohol content,
hard scouring pads or sponges,
high-pressure cleaners or steam cleaners.
Thoroughly rinse all new sponges before use.
Observe all instructions and warnings accompanying 
cleaning agents.
Cleaning the metal grease filter
9
WARNING
Risk of fire
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two 
months.
Never operate the appliance without the grease 
filter.
NOTICES
Do not use any aggressive, acidic or alkaline 
cleaning agents.
When cleaning the metal grease filters, also clean 
the metal grease filter holder in the appliance 
with a moist cloth.
You can clean the metal grease filters in a 
dishwasher or by hand.
Area
Cleaning agents
Stainless steel
Warm soapy water: 
Clean with a dish rag and dry with a 
soft towel.
Only clean stainless steel with the 
grain.
Specific products for stainless steel 
care are available from customer ser-
vice or from specialized retailers. 
Apply a thin layer of the care product 
with a soft cloth.
Varnished surfaces Warm soapy water: 
Clean with a damp dish rag and dry 
with a soft towel.
Do not use stainless steel cleaner.
Aluminum and 
plastic
Glass cleaner: 
Clean with a soft cloth.
Glass
Glass cleaner: 
Clean with a soft cloth. Do not use a 
glass scraper.
Controls
Warm soapy water: 
Clean with a damp dish rag and dry 
with a soft towel.
Risk of damage to electronics due to 
permeating damp. Never clean 
controls with a wet cloth.
Do not use stainless steel cleaner.