Zephyr AK1136B マニュアル
www.zephyronline.com
12
Maintenance -
Cleaning and Replacing Light Bulbs
Aluminum Mesh Filters:
Clean frequently using hot water and a mild, non abrasive detergent. Filters are dishwasher safe.
Carbon Filters:
Clean carbon filters holder frequently with a damp cloth and mild detergent. DO NOT immerse carbon filter in water or put in
dishwasher. The carbon filters should be replaced every 4 to 6 months under normal use.
dishwasher. The carbon filters should be replaced every 4 to 6 months under normal use.
Hood Surface:
Remove filters. Use a damp cloth and a mild detergent to wipe all residue-laden surfaces. Use care when cleaning fan blades,
it must not become bent or misaligned. DO NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces are completely
dry before re-installing filters and using hood.
it must not become bent or misaligned. DO NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces are completely
dry before re-installing filters and using hood.
Replacing Light Bulbs:
CAUTION: Light bulbs become extremely hot when turned on. DO NOT touch bulbs until switched off and cooled.
Touching hot bulbs may cause serious burns.
Touching hot bulbs may cause serious burns.
Hood comes with (2) R16 40W incandescent bulbs. You may also use (2) PAR20 35W or 50W halogen light bulbs.
(purchased separately)
(purchased separately)
Remove bulb by unscrewing counter-clockwise. Use a suction cup or rubber/latex glove to grip the bulb if removing bulb
is difficult.
is difficult.