Gaggenau VL041715 インストール手順

,

To reduce the risk of ignition of 

surrounding combustible materials, install at 
least 1¼" (30 mm) from both sidewalls and at 
least 2" (50 mm) from the rear wall.

The countertop must be level and horizontal. The 
stability of the countertop must be maintained after 
the cut-out has been made.

Create the cut-out in the countertop for one or several 
Vario appliances according to the installation diagram. 
The angle of of the cut surface to the countertop must 
be 90°.

After creating cut-out, remove shavings. Seal cut 
surfaces in a heat-resistant manner.

Some solid surface countertops require special 
installations. For example, heat reflective tape and 
rounded corners may be necessary. Contact the 
countertop manufacturer for instructions specific to 
your countertop.

Observe minimum distance between appliance 
underside and furniture parts of 

3

/

8

" (10 mm).

Take into 

account space requirement for VV 200 connection 
strip between the appliances. Appliances can also be 
installed in individual cut-outs, bearing in mind a 
minimum distance between the appliances of 1

9

/

16

" 

(40 mm).

PP

PP